Adaptor thread to convert 3/8" to 1/4".
Reusable thread, a useful accessory.

The HQ2 camera has a 1/4" 20 tripod thread at the rear of the camera where the cable exits. This billet ring holds the HQ2 camera tight and provides the thread mount along the shaft of the camera giving much better stability. You can use this ring only with our HQ2 bullet camera and then with any of the camera suction mounts or clamp mounts on this site.
19mm inside dia.

As above but machined to precisely fir our sony HQ1 bullet camera only.
21mm inside dia.

A short tie down strap with one way buckle. Ideal for attaching our Samsonite camera bags safely within your vehicle (round a roll cage for example).
We recommend using a tether when mounting any camera to the exterior of a car or bike.

Small adaptor that converts 1/4" to 3/8", with a diameter of around a 10p piece.
Has a rubber support to help absorb vibration.

Allows the superclamp to grip better on flatter surfaces. Two wedges supplied.

The small tether is constructed of nylon webbing and sewn together to handle over 40 kg of weight.
A tether should ALWAYS be used when you have a camera mounted on the exterior of a vehicle.

Plugs into Superclamp, to allow direct mounting of a camera, or to attach a ball and socket.
Has a 3/8" thread on one end and a 1/4" thread on the other.
Can be purchased together with a superclamp.

The secret formula suction cups are available to Sticky Pod owners to customize your Sticky Pod for your particular needs. Not many camera mounts can do this at all.

Replacement suction cups for some of the mounts we sell on the site.
Available in large or small format.

For fitting onto a 16mm arm i.e magic arm or tilt top head.

CNC machined solid aluminium for a flawless fit and finish. These black anodized (not painted), solid aluminum extensions will not chip or rust. They make an excellent addition to a Sticky Pod or other mount.
An extension gives extra reach for creative work. Combined with a knuckle, it gives many extra possibilities.

As above but 6 inches in length.

As above but 12 inches in length.

Alloy extension, extends from approx 180mm to 290mm. Locked in place by a wheel in the middle of the shaft.
Has a recessed female 1/4" thread, beginning 7mm from the base. The male thread is long at 14mm from the end.

Nylon double swivel head, can be added to many of our mounts to add extra adjustment.
Has a brass insert in the base with a 1/4" thread.

12cm long extension arm and double ended spigot providing 1/4" and 3/8" camera threads, suitable for use with the pump cup and swivel, superclamp and mini clamp amongst others. Has a rounded end.

Quality ball and socket head, with a 1/4" screw thread in the base and head. Can be used with any other mount or tripod which has a 1/4" thread, to give an extra joint for fine tuning the angle you may wish to film. This model has a single handle to control the ball and socket.

Flexible arm for use with the Superclamp. 55cm long, 18mm diameter, 3/8" female thread and 1/4" male thread.
A brilliant accessory.

Allows fitting of cameras with the larger 3/8" mounting thread into a super clamp or pump cup with swivel. Also compatible with some ball heads with this size thread.

The Sticky Pod knuckle's all metal construction will provide you with the reliability and safety you need under any circumstances.

Can be used to provide an extra joint with any of our mounts.

Quality ball and socket head, with a 1/4" screw thread in the base and head.
Can be used with any other mount or tripod which has a 1/4" thread, to give an extra joint for fine tuning the angle you may wish to film.
This model has an additional handle to control movement of the base, as well as having another handle to control the ball and socket.

Cradle that attaches around the middle of the bullet camera body, instead of screwing into the rear of the unit.
This method of attachment allows for slightly better support and so less shaky images.
Designed to be used with almost all of our mounts attaches to the 1/4" screw thread.

Manfrotto double ball tilt top, suitable for use with the Superclamp (with camera stud), Pump cup with swivel, or for attaching to anything with a 1/4" thread (eg ball and socket head).
Strong, stable platform with a wide range of adjustment.
Rubber on the camera head helps damp out vibration.

Mini tripod that can be used alone or in combination with the Suction Pod (see suction mounts section). It has a removable swivel head.
At its tallest it stands 850mm, at its shortest it is 330mm.
The centre section can act as a removable monopod for use alone, or wih the suction pod.
Lightweight, and made from alloy and plastic parts.
Manufacturer rated as being suitable for cameras upto 2.5kg

Magic arm with camera bracket, for use with Pumpcup and swivel, Superclamp, or for screwing onto a 3/8" or 1/4" threaded fitting.
Very good quality, sturdy, jointed arm that is rated at supporting upto 3kg. Strong locking action, holding all three joints in place.