Filming Kits |
| Mini DVR2 Kit |
| Mini DVR 3 Kit | ContourHD | GoPro HD Cameras |
Camera Mounts |
| Clamp/Bar Mounts |
| Helmet Mount |
| Accessories |
Bullet Cameras |
| Sony HQ2 580 |
| Sony HQ1 580 |
| Vari-Focal HQ1 |
| Pro 520 |
Extras |
| Microphones |
| Batteries |
| TFT Screens |
| Multi-Camera |
| Cables |
| Remote Controls |
| Lipstick Lenses |
Intercom Audio Cable
You can sse this 5m audio cable to connect your peltor intercom system to our digital recorders. Also works with other intercom systems that have a normal audio output. If you're not sure then please contact us and we'll be happy to help you.
£8.50£19.99£19.99 in inc VAT
(£7.39 ex VAT)
3 Metre A/V Cable
A 3m Gold plated A/V cable. For connecting cameras to other equipment. Use with the phono coupler below to extend the cables on your camera. 15m also available. Good quality cables, don't use cheap ones it's just not worth it.
Use these cables with the coupler below to extend the video cables from your camera. Male to male plugs. Ideal for extending audio and video. Use with an RCA coupler (below).
£10.00£19.99£19.99 inc inc VAT
(£8.70 ex VAT)
RCA - Phono Coupler
This is what you need if you want to extend the A/V cable and mic cable for your camera.. Female to Female sockets.
RCA - Male Phono Coupler
Use this cable to extend both the video and the power for any of our cameras.
Male 2.1mm DC plug and male RCA phono plug on one end, female 2.1mm DC socket and female RCA phono socket on the other end.
£1.50£19.99£19.99 inc inc VAT
(£1.31 ex VAT)
Cig. Lighter adapter
Power the PDR100 from your accessory socket. Set to 12v positive centre pin. You can use this to power multiple 12v devices or extra cameras using a DC splitter cable.
£10.00 inc VAT
(£8.70 ex VAT)
DC Power Splitter
If you need to power more than one 12v device from your power source then you use a power splitter like this one.
£1.99 inc VAT
(£1.73 ex VAT)
5 way DC Power Splitter
For powering up to five seperate items. Useful for a multi-camera setup. 1 x DC input and 5 x DC outputs. Should be used with a cig. lighter adapter or a 12v regulator.
£4.99 inc VAT
(£4.34 ex VAT)
Right angled A/V connection lead
This is a heavy duty high quality replacement cable for your camcorder. Compatible with camcorders that use a 3.5mm jack input for the a/v connection and can also be used to output video from the Chasecam PDR100. This tough cable has the added advantage of a right angled plug.
12v Hard - Wired Regulator
If you want to connect your bullet camera to a bike or car 12v system then you will need to regulate the voltage going in to the camera. This little box will limit the power to 12v only, protecting your equipment. It will also act as a filter to ensure no interference on your video. It has tipped bare wires on the input side and a 2.1mm DC plug on the output side. An in-line fuse should be used if connecting directly to a battery. It is advised to connect this regulator to the ignition so it is only powered up when you turn the key...or use a switch in front of the regulator (see below)
DC Power Switch
A handy power switch that you can use to turn your equipment on and off with.
Supplied with a 1.5m cable and two connectors. One female 2.1mm DC and one male 2.1mm DC. This will go in between your power supply and your camera and provides a tidy solution for switching the 12v power to your camera or recorder.
£10.00£19.99£19.99 in inc VAT
(£8.70 ex VAT
12v and 5v Hard Wiring Kit
Power both the camera and the recorder from your vehicle's own 12v battery. Ideally, this should be connected to the fuse box or direct to the battery if you use an in-line fuse.
This kit will give you two power outputs, one at 5v and one at 12v for your camera and the recorder.
Kit includes:
1 x 12v regulator
1 x DC Power Splitter
1 x 5v regulator