
Supplied with:
1 x HQR-C2 Recorder
2 x HQ2 Bullet cameraa
1 x Mains charger
1 x IR Remote
1 x LAN Cable
1 x Camera connecting cable
Choice of Extension cables
1 x Software and Manual CD
1 x USB Card reader
1 x Hard Carry Case
You will need:
1 x Fast Compact flash memory card
2 x Camera mount
Recommended:
1 x LANC remote controller (version 1.6)
HQR-C2 PiP Twin Camera Package
Here it is!.... A Picture in Picture (PiP) high quality bullet camera and recorder system that's easy to set up and easy to use! Recommended for both in car or on bike two camera setup.
This is a brand new and very unique product. Nothing else like this currently exists without having cables and connectors and external monitors and a bible sized manual.
The HQR - C2 is basically a HQR2 DVD quality digital video recorder with built-in picture in picture processor.
You can plug 2 Bullet cameras in to this device and it will inlay the picture from one camera in to the other. You can have a main forward facing camera and a camera pointing to the rear or at your clocks or pedals. You get full control of the position and the size of the PiP.
Unlike other products similar to this, the HQR - C2 provides 12v power to the bullet cameras and displays what you are recording on it's built-in LCD screen, one box does it all. The IR remote is supplied to allow you to select full screen from either of the cameras, PiP or side by side mode. You can make these changes in real-time as you are recording.
Because the HQR-C2 uses the same electronics for encoding video as the HQR2 you get the same high quality mpeg4 or mpeg2 recordings with all the extra features such as LANC remote compatibility, "Sports Mode" and record on power up. 720 x 576 resolution 8mb/s in either Mpeg2 or Mpeg4 mode.
The HQR - C2 has a built-in Lithium Polymer gel battery which will power itself plus 2 HQ2 bullet cameras for over 2 hours. Powering the HQR - C2 from an external 12v supply such as your car or bike's battery is simple using the addtional cig lighter adapter kit or hard wiring kit.
The real advantage of this package is just how easy it is to setup. Traditionally multi-camera systems require installations with lots of connectors and wiring. The HQR - C2 makes it plug and play providing a 100% completly portable and affordable picture in picture bullet camera system.
You can purchase the HQR - C2 recorder on it's own to be used with your existing cameras although for maximum power consumption and image quality we highly recommend using the HQ2 cameras.
HQR - C2 has the same high quality push-fit locking connector found on the HQR2 which breaks out to five connections, two for video, two for 12v power for the cameras and an external audio input for connecting an external microphone or connection to an Intercom or radio system.
1mb/s : 100 min/GB
2mb/s : 60 min/GB
4mb/s : 40 min/GB
6mb/s : 20 min/GB (dvd quality)
8mb/s : 15 min/GB
More info on the HQ1 bullet camera
More info on the HQ2 bullet camera
Downloads:
Software: Config software
Extension Cables for HQ cameras
These are our new extension cables available for the HQ bullet cameras on this site only.
You can connect any combination of these together for bespoke lengths of up to 50m in total.
The connectors on these cables are waterproof down to 3m.
External Stereo Microphone
The HQR-1 has a built-in microphone but you can get much better results when using this stereo mic.
This is a high quality clip mic which plugs directly in to the HQR1. No need for an external battery pack or pre-amp.
The mic is supplied with a 1 metre cable which can easily be extended.
A strong mic clip is also included for simple attachment.
12v Li-ion 6000mah Battery Pack
This neat battery pack can be used to power up to 5 bullet cameras at the same time.
Comes with a UK mains charger and it has an integrated battery LED level meter.
This battery will add a further 4 to 5 hours record time to the HQR digital video recorder.
Supplied with both 1.3 and 2.1mm dc connections.
Small, pocket sized: 100 x 70 x 20mm 170grms.
12vdc - 1 amp max.
12v Hard Wired Regulator
Use to hard wire your HQR to your bike or car's 12v system. Eliminates visual feedback and interference from the engine. Use with the DC splitter to power more than one device.
You should connect this to a 5amp fuse for protection.





















